What To Do If Your iPhone Battery Does Not Charge:
iPhone Won’t Charge: That the battery of a mobile phone does not charge is something more common than you think. In fact, store clerks have already become accustomed to having to handle this problem. However, today we have proposed to give you some solutions for iPhones to which the batteries do not charge them. Yes, you can avoid this problem at home.
If the battery of an iPhone does not charge it can be a problem of software, hardware or the accessories that you are using to charge the device. There may also be some problem in the electrical distribution of the place where you are. Although we are not going to talk much about the latter. Let’s put the solutions on the table. Even Many People says that My iPhone Won’t Charge but it says its charging. These all problems will be solved after going through this article.
First, Why The Battery May Not Charge Properly? – iPhone Won’t Charge Fix:
First, the reasons why a battery might not be charging. When you put the charger to the device, the installed software decides whether or not to start loading. That’s why you have to check this first before moving on to other solutions. It could also happen. As we have said, that some of the devices are failing. But let’s do all kinds of checks before buying a new battery.
First of all, try the iPhone on all possible power outlets, and with various accessories. Including chargers that plug into the cigarette lighter of cars. If none works, we move on to the solutions. The solutions which we go through to check why iPhone won’t charge would be
- Check the Charging Cable Status
- Probate with Different Charge
- Clean the Charging Port
- Put the iPhone in DFU Mode and Restore it.
- Make a Hard Reset of your iPhone.
- Repair the iPhone.
These are the steps which we would check for any possible error for iPhone not charging issue. Let’s check each and every option which we have to figure it out.
1. Check the Charging Cable Status:
Sometimes the charging cable of the Phone may not work properly. In this case, the so-called Lightning cable is damaged or does not work. Take a look to make sure it does not have any scratches or physical problems.
If there is apparently no damage, check the operation by connecting the phone with this cable to a computer. In this case, if that connection is made correctly, you will see a message on the screen. You can also try with a friend’s Lightning cable. In the event that the battery recharges, you already know that one of the cables is broken.
Remember in any case that Apple offers a warranty period for your cables. So you can change them if they are damaged. It is possible that the cable you are using is not official. We recommend spending a little more money on an accessory that does not damage your phone and gives you guarantees that it will work properly.
2. Probate With A Different Charger:
If it has happened with the Lightning cable it can also happen with the charger. Check if the iPhone charges with other chargers, in other media (such as a computer or a different power outlet) and with other accessories. If the charger is broken, it will not work. It is a good idea to get a different one to clear this doubt.
It may also be that you have a low-quality charger that has stopped working. We recommend trying an official one that also has the correct voltage, like the iPads. Beware of cheap or low-quality accessories, because they may not work properly.
3. Clean The Charging Port:
Dirt from the ports we use to plug in the charger can also be a problem. Use a flashlight to check if the charging port of your iPhone is in good condition. If you see dirt, it is best to clean it so that the connections are made correctly. For this, you can use a ToothPick or brush with bristles that are not very hard and clean it gently. Remember that the brushes must have protection against static electricity.
It can also happen inside the dirt that the loading port has become wet. Sometimes, even if you clean it, the liquid will short circuit and disable the port. In these cases, it is necessary to repair the phone. So Make sure to clean it carefully and make the process neat.
4. Put The Phone in DFU Mode And Restore It:
Even if the phone does not load, it is always possible to execute a DFU restore. This sometimes works. These types of restorations are somewhat more aggressive than Hard Reset, but they also help solve software problems that have not been detected before.
Follow these steps to put an iPhone in DFU mode:
- Connect the iPhone to a computer and open iTunes. It does not matter if the iPhone is on or off.
- Press and hold the Power and Home buttons (On iPhone 6S and later) or the Volume Down button (On iPhone 7 and later) for eight seconds.
- Then, release the Power button but continue pressing the Home or Volume Down until iTunes displays the message (iTunes has detected an iPhone in Recovery Mode).
- Stop pressing the buttons that you were pressing and the screen of the phone will turn white. In case you have correctly entered the DFU Mode.
- Restore the iPhone using iTunes.
If you have an iPhone 8, 8 Plus or X, follow these steps:
- Connect the iPhone to a computer and open iTunes.
- Press and release the Volume Up button. Then press and quickly release the Volume Down button and then press and hold the side button until the screen turns black.
- As soon as the screen turns black, press and hold the Volume Down button until the iPhone is displayed in iTunes.
- When the iPhone is displayed in iTunes, release the volume button. The device should have been put in DFU Mode. If the Apple logo appears on the screen, follow the steps from the first one.
- DFU Mode can help solve a battery charging problem, so we recommend that you run it.
5. Make a Hard Reset of the iPhone:
We have already said that the software is the one that decides whether the phones are loaded or not. If it is a software problem, the most normal thing is to make a Hard Reset of the iPhone, that is, a format. Taking into account that each device has its own way of doing things. You have a list of the buttons that you have to press for the Hard Reset to be completed. Do not forget that you will lose the stored data.
- iPhone 6S, 6S Plus, SE and older models: Press and hold the Power and Home buttons simultaneously, while the phone is off. If you have done well, the Apple logo will appear on the screen and the Hard Reset will be made.
- iPhone 7 and 7 Plus: Press and hold the Power and Volume Down buttons together until the Apple logo appears on the screen. The operation should be done automatically.
- iPhone 8, 8 Plus and iPhone X: For these devices, you have to do three steps. First, while the phone is off, press and quickly release the Volume Up button. Second, press and quickly release the Volume Down button. The final step is to press and hold the Power button, located on one side of the phone until the Apple logo appears on the screen. The operation will be done automatically.
Keep in mind that if you do not have enough battery in the phone you can not do this step. Remember that in some phones it is necessary to press the indicated buttons for more than 20 seconds.
6. Repair The iPhone:
If any of the components is seriously damaged or has stopped working, the only option left is to take the iPhone to Apple technical service. They will tell you the price of the operation. We recommend that you go to the official service, where you can also make use of the guarantee that the device has.
If all fails
If everything has failed and there is no solution for charging your iPhone’s battery, the best option is to buy a new one. Keep in mind that there are also second-hand or zero-kilometer devices thanks to which you can save money.
So these are the 6 Important Points which you need to check in order to know the exact issue which is causing this problem. Just follow according to the steps provided. You will figure it out as soon as possible. I hope this article has helped you to figure out the issue for iPhone won’t charge. Like us and share the post with your favorite buddies.